Follow the next steps and learn how to use ThinVNC Access Point in a few steps:
1. Log in:
| a. | Open your preferred web browser. |
| b. | Type into the address bar https://127.0.0.1:443/ . You can also change the 127.0.0.1 part with the server IP address or DNS name where Access Point was installed. |
| c. | Enter the credentials admin/admin |
| d. | Press the "Log in" button. |
2. Create your first user:
| a. | Click on "Users" on the upper right menu. |
| b. | Click on the red plus (+) symbol |
| c. | Enter the User ID, Name and Password values. |
| d. | Click on the bottom "Save" button. |
3. Create a PC to be accessed and give the user permission:
| a. | Click on "All PC's" on the upper right menu. |
| b. | Click on the red plus (+) symbol |
| c. | Enter the IP Address and check the RDP option. |
| d. | Select the created user on the "Available" list. |
| e. | Move the user to the "Assigned" list, by clicking the right-left arrow. |
| f. | Press the "Save" button. |
4. Log in with the created user:
| a. | Press the "Log out" option on the upper right menu. |
| b. | Enter the new user "User Name" (User ID) and Password. |
| c. | Press the Log in button |
5. Connect using ThinVNC:
a. On the list of PC's available to be connected, press the ThinVNC button of the PC line you want to connect to :
a1. If the button looks gray, it is because the remote machine does not have ThinVNC service on, or the port is not configured correctly.
a2. If the button is yellow it is because you can connect to the remote machine, through ThinVNC. Click it and enjoy the connection!
6. Connect using RDP:
a. On the list of PC's available to be connected, press the RDP button of the PC line you want to connect to :
a1. If the button looks gray, could be because the RDP connections are not enabled on the remote machine.
a2. If the button is blue it is because you can connect to the remote machine, through RDP. Click it and enjoy the connection!